; Left-side value is the text id, this stays constant. Right-side value is the
; text string to be used for this id. Edit the right-side value to change
; the text used. In most cases HTML can be used for the right-side value.

; Bottom toolbar

File=Bestand
Open=Openen
Save As=Opslaan Als
New=Nieuw
Import=Importeren
Export=Exporteren
Save=Opslaan
Undo=Ongedaan maken
Redo=Opnieuw
Delete=Verwijderen
Split=Splitsen
Top=Bovenkant
Bottom=Onderkant
Front=Voorkant
Back=Achterkant
Right=Rechts
Left=Links
3D=3D
Grid Snap=Op raster<br>uitlijnen
Straight Snap=Recht<br>uitlijnen
Object Snap=Op object<br>uitlijnen
Options=Opties
Help=Help


; Side pane

; The text "Calculating..." is displayed at the bottom of the command options area when
; a long running calculation is taking place.
Calculating=Berekenen...
*Calculation failed message=Calculation failed

Repeat=Herhalen

Draw curve tab=Teken lijn
Lines=Lijnen
Line=Lijn
Polyline=Polylijn
Freeform=Vrije hand
ControlPointCurve=Control<br>punten
InterpCurve=Door<br>punten
SketchCurve=Schetsen
Rect=Rechthoek
RectCorner=Hoek
RectCenter=Midden
Rect3pts=3 punten
Polygon=Polygon
PolygonCenter=Midden
PolygonEdge=Rand
PolygonStar=Ster
Circles=Cirkels
CircleCenter=Midden
CircleDiameter=Diameter
Circle3pt=3 punten
CircleTangent=Tan
Arc=Boog
ArcCenter=Midden
ArcContinue=Vervolg
Arc3pt=3 punten
ArcTangent=Tan
Ellipse=Ovaal
EllipseCenter=Midden
EllipseDiameter=Diameter
EllipseCorner=Hoeken
More=Meer
Point=Punt
Helix=Spiraal
*Conic=Conic

Draw solid tab=Teken primitief
Plane=Vlak
PlaneCorner=Hoek
PlaneCenter=Midden
Plane3pts=3 punten
Box=Kubus
BoxCorner=Hoek
BoxCenter=Midden
Box3pts=3 punten
Sphere=Bol
Cylinder=Cylinder
Cone=Kegel
Text=Tekst

Edit tab=Bewerken
Join=Samenvoegen
Separate=Scheiden
Trim=Bijsnijden
Extend=Verlengen
Show pts=Toon punten
Add pt=Punt toevoegen
Copy clipboard=Kopieren
Paste=Plakken
Hide=Verbergen
*Lock=Lock
History=Geschiedenis

View tab=Venster
Reset all=Alles herstellen
Image=Afbeelding
*CPlane=CPlane

Select tab=Selecteren
Sel all=Alles selecteren
Desel all=Alles deselecteren
Invert=Omkeren

Construct tab=Maken
Boolean=Boolean
BooleanDifference=Uitsnijden
BooleanUnion=Verenigen
BooleanIntersection=Verschil
BooleanMerge=Samenvoegen
Fillet=Afronden
Chamfer=Afvlakken
Offset=Offset
Shell=Shell
*Inset=Inset
Planar=Planar
Extrude=Uitschuiven
Revolve=Revolve
RailRevolve=Rail revolve
Loft=Loft
Sweep=Sweep
Blend=Blend
*Nsided=Nsided
Network=Netwerk
ConstructCurve=Lijn
Project=Projecteren
Intersect=Snijpunt
*Silhouette=Silhou
*Isocurve=Iso

Transform tab=Wijzigen
Move=Verplaatsen
Copy=Kopieren
Rotate=Roteren
RotateAxis=As roteren
Scale=Schalen
Scale2D=Schalen 2D
Scale1D=Schalen 1D
Mirror=Spiegelen
Array=Vermenigvuldigen
ArrayGrid=Raster
ArrayDir=Richting
ArrayCircular=Cirkel
ArrayCurve=Lijn
Align=Uitlijnen
*Orient=Orient
*OrientLineToLine=Line/Line
*OrientViewToView=View/View
*Deform=Deform
*Flow=Flow
*Twist=Twist

*SubD tab=SubD
*SubD create menu button=Create
*SubD create from file menu item=From file

*Dim tab=Dim
*Dim horizontal=Horiz
*Dim vertical=Vert
*Dim aligned=Aligned
*Dim radius=Radius
*Dim angle=Angle
*Dim leader=Leader
*Dim text=Text

; "Done" and "Cancel" buttons that appear in the command UI area.
Command cancel button=Annuleren
Command done button=Gereed
*Recalc button=Recalc

; Common dialog buttons
Dialog close button=Sluiten
Dialog ok button=OK
Dialog cancel button=Annuleren
*Dialog retry button=Retry
*Dialog clear button=Clear
Restore defaults button=Standaard herstellen


; Construction line menu that pops up when you draw a construction line and
; click and hold down on the tag.
Relocate cline=Clijn herlocaliseren
Reorient cline=Clijn herorienteren
Rotate cline label=Roteren cline:
Cline division snap label=Division uitlijning:
Project next pt=Volgend punt projecteren


; Grid options dialog
Show grid checkbox=Toon raster
Show grid axes checkbox=Toon raster as
*Show grid z axis in 3D view checkbox=Show grid z axis in 3D view
Grid size label=Raster formaat:
Snap size label=Uitlijn afstand:
Grid sections label=Raster secties:
Accented lines label=Geaccentueerde lijnen per:
X axis color label=X-as kleur:
Y axis color label=Y-as kleur:
Z axis color label=Z-as kleur:
Grid lines section header=Raster lijnen
Accented grid lines section header=Geaccentueerde raster lijnen
Grid line width label=Breedte:
Grid line color label=Kleur:
Grid line style label=Stijl:
Solid line style=Solide
Dotted line style=Punten
Dashed line style=Strepen
Long Dashed line style=Lange strepen

; Grid snap menu (launched from arrow above grid snap button)
Show grid menu item=Toon raster

; Help menu (launched from arrow above help button)
About menu item=Over MoI

; About dialog
About dialog title=Over MoI
Version label=Beta versie
Expire label=Verloopt op
Web label=Web:
Email label=E-mail:
; Opens License keys dialog that shows license keys
*License keys link=License keys
; Opens LicenseAgreement.rtf file containing End User License Agreement (EULA)
*EULA link=EULA

; License keys dialog, shows MoI license keys. Launched from About dialog.
*License keys dialog title=License keys
*Your license keys label=Your license keys:

; Clear license keys confirmation dialog, shows if you push Clear on the License keys dialog.
; If the user pushes OK here, saved license keys will be cleared off the system and they will
; need to enter in their license keys on next program run. This can be used if the user wants to
; change the license key that is being used on this system.
*Clear license keys dialog title=Clear license keys
*Clear license keys dialog message=This will remove saved license keys for this and previous versions.<br><br>The next time you launch MoI it will prompt you to enter in your license key.

; Mesh dialog
Mesh dialog title=Mesh opties
Fewer polygons label=Minder<br>polygons
More polygons label=Meer<br>polygons
Output label=Output:
N-gons=N-gons
Quads & Triangles=Quads & Driehoeken
Triangles only=Alleen driehoeken
Display label=Weergave:
Shaded + edges=Beschaduwd + randen
Shaded=Beschaduwd
Wireframe=Draadmodel
Weld checkbox=Voeg vertices langs rand samen
Mesh angle label=Hoek:
Divide larger than label=Deel groter dan:
Divide larger than apply to curved=Gebogen
Divide larger than apply to planes=Vlakken
Divide larger than apply to all=Alles
Avoid smaller than label=Voorkom kleiner dan:
Aspect ratio limit label=Aspect ratio limiet:
Poly count label=Aantal polygons:
Point count label=Aantal punten:
*Insufficient memory warning text=Insufficient memory

; AI dialog - shown when saving an AI or PDF type file
AI dialog title=AI export opties
*PDF dialog title=PDF export options
AI projection view label=Te projecteren venster:
*AI scale label=Scale:
*AI scale fit to page=Fit to page
*AI scale preserve units=Preserve units
; When the Scale: option is set to Scale: "Preserve units", another setting will be shown that says:
; "X units in MoI = Y mm/cm/in/pt on page"
; Where X and Y are numeric input fields. The following 2 items are for the text labels of that setting
*AI scale units in MoI=units in MoI
*AI scale on page=on page
*AI center on page checkbox=Center on page
; Page size settings, can be one of the standard page sizes of Letter, Legal, Tabloid, A3, A4, A5, or Custom.
; When set to custom an additional 3 controls are shown to set width, height, and units values.
*AI page size label=Page size:
*AI page size letter=Letter
*AI page size legal=Legal
*AI page size tabloid=Tabloid
*AI page size a3=A3
*AI page size a4=A4
*AI page size a5=A5
*AI page size custom=Custom
*AI page size landscape checkbox=Landscape
*AI page size custom width label=w:
*AI page size custom height label=h:
; Abbreviated label for typographic "points" units.
*Points label=pt
*AI Generate outlines checkbox=Generate outlines
*AI Generate silhouettes checkbox=Generate silhouettes
*AI Generate hidden lines checkbox=Generate hidden lines
*AI Line style options button=Line style options
*AI Shaded background checkbox=Shaded background
*AI Ignore tangent edges checkbox=Ignore tangent edges
*AI Canvas megapixel resolution label=Canvas megapixel resolution:
; Secondary dialog that comes up when you click "Line style options" button.
*AI line style options dialog title=Line style options
*AI line style width column label=Width
*AI line style color column label=Color
*AI line style layer column label=Layer
*AI line style visible lines row=Visible lines:
*AI line style outlines row=Outlines:
*AI line style silhouettes row=Silhouettes:
*AI line style hidden lines row=Hidden lines:
*AI line style annotations row=Annotations:
; Colors or layers have 2 options: "From style" or "Custom:", Custom: shows a control (either color swatch or text input) after it.
; "From style" has an option for applying a prefix or suffix to the style name.
*AI line style from style=From style
*AI line style custom=Custom:
*AI line style prefix label=Prefix:
*AI line style suffix label=Suffix:
*AI line style hidden lines opacity label=Hidden lines opacity:
*AI line style hidden lines dashed checkbox=Hidden lines dashed
*AI line style hidden lines dash size label=Dash:
*AI line style hidden lines gap size label=Gap:
*Visible lines default layer name=Visible lines
*Outlines default layer name=Outlines
*Silhouettes default layer name=Silhouettes
*Hidden lines default layer name=Hidden lines
*Background image layer name=Background image
*Annotations default layer name=Annotations
*PDF error dialog title=PDF error
*PDF error dialog text=Unable to open PDF file for writing, check if file is open in Adobe Reader.
; "Generating hidden lines" appears above the progress bar shown during hidden line removal calculation.
*Generating hidden lines message=Generating hidden lines

; SKP error dialog - shown when there is an error opening SKP file for writing.
*SKP error dialog title=SKP error
*SKP error dialog text=Error writing file.<br><br>If the file is open in SketchUp, close it in SketchUp first.

; File write dialog - shown when there was an error writing to a file. Could be file permissions or out of disk space.
*File write error dialog title=Error writing file
*File write error dialog text=Error writing file:<br>%1%<br><br>Check file permissions and available disk space.

; Command not found dialog - shown when user typed in a command name or triggered a shortcut with a command name but
; no command with that name could be found. Usually caused by trying to set up a plug-in command but not having
; the command files copied into one of MoI's commands folders.
*Command not found dialog title=Command not found
*Command not found dialog text=Command %1% not found.<br>Might be a plug-in is not installed.

; DXF dialog - shown when saving a DXF file
*DXF dialog title=DXF export options
*DXF export type label=Export type:
*DXF export type 2D projection=2D projection
*DXF export type 3D curves=3D curves
*DXF write curves as label=Write curves as:
*DXF write curves as splines=Splines
*DXF write curves as cubic splines=Cubic splines
*DXF write curves as polylines=Polylines
*DXF polyline angle label=Angle:

; Number pad popup that shows when you click on a numeric entry field
1 button=1
2 button=2
3 button=3
4 button=4
5 button=5
6 button=6
7 button=7
8 button=8
9 button=9
0 button=0
Period decimal point button=.
Comma decimal point button=,
Minus button=-
Backspace button=bk

; A similar number popup shows when you click on the x/y/z point input, it is
; the same as above except it has one additional "space" button for separating x/y/z inputs.
Space button=Spatie


; Object snap menu, activated by the arrow above the Object Snap button on the bottom toolbar
Origin menu item=Origine (origin)
Axis menu item=As
End menu item=Einde (end)
Mid menu item=Midden (mid)
Center menu item=Centrum (center)
Intersection menu item=Snijpunt (Int)
Quadrant menu item=Quadrant
Point menu item=Punt
On menu item=Op (On)
*On surface menu item=On surface
Perpendicular menu item=Loodrecht (Perpendicular)
Tangent menu item=Raaklijn
Perp / Perp menu item=Perp / Perp
Tan / Tan menu item=Tan / Tan

; Object snap options dialog
Object snap options label=Object uitlijn opties
Use apparent intersections checkbox=Gebruik logische kruisingen
Project to plane checkbox=Op vlak projecteren in ortho vensters
Snap to picked points checkbox=Lijn uit op geselecteerde punten
*Snap to locked objects checkbox=Snap to locked objects
Snap radius label=Uitlijn radius:
Object snap to button=Uitlijnen op:

; Object snaps - this is the text displayed inside the viewport for an object snap
Origin=Origine
*Origin (cplane)=Origin (cplane)
On x=Op x
On y=Op y
On z=Op z
On axis=Op as
End=Einde
Mid=Midden
Cen=Centrum
Int=Int
CPlane Int=CPlane Int
Quad=Quad
Pt=Pnt
On=Op
*On srf=On srf
Perp=Perp
Tan=Tan
Perp/Perp=Perp/Perp
Tan/Tan=Tan/Tan
Div=Div

; "Flat" snap for edit frame that gives a snap point for collapsing the frame down
; in one direction like to flatten a set of points into a line.
*Flat snap=Flat

; Straight snap options dialog
Straight snap options label=Recht uitlijnen opties
Vertical snapping checkbox=Verticaal uitlijnen
Tangent snapping checkbox=Op raaklijn uitlijnen
Perpendicular snapping checkbox=Loodrecht uitlijnen
*Surface normal snapping checkbox=Surface normal snapping
Snap angle label=Uitlijn hoek:
Activate distance label=Activeringsafstand:
Keep active distance label=Activeringsafstand behouden:

; Straight snaps - this is the text displayed inside a viewport at the base point for straight snaps
; When a straight snap is in a world axis direction, that axis is displayed.
StraightSnapX=x
StraightSnapNegX=-x
StraightSnapY=y
StraightSnapNegY=-y
StraightSnapZ=z
StraightSnapNegZ=-z
StraightSnapTan=Tan
StraightSnapPerp=Perp
; "Normal" is for a surface normal - a line perpendicular to a surface instead of a curve.
*StraightSnapNormal=Normal
; "Elev" would be displayed for straight snap off of a custom construction plane. But this
; isn't seen currently because there isn't a way to set a custom construction plane yet.
StraightSnapElev=Elev

; Units settings
Current unit system label=Eenheden:
Units options button=Eenheden opties
Units options dialog title=Eenheden opties
Default unit system label=Standaard eenheden:
Scale on unit system change checkbox=Schalen bij aanpassing eenheden
Scale when importing different units checkbox=Schalen bij importeren versch. eenheden
; Distance display is an option that shows up when the units are set to either Feet or Inches, to choose between either a decimal display like 8.5, or a feet & inches type display like 8' 6"
*Distance display label=Distance display:
*Default distance display label=Default distance display:
*Distance display Decimal=Decimal
*Distance display Feet & Inches=Feet & Inches
No unit system=Geen eenheden
Millimeters=Millimeters
Centimeters=Centimeters
Meters=Meters
Kilometers=Kilometers
Inches=Inches
Feet=Feet
Miles=Mijlen

; Unit system labels - these are short labels used in small spaces to label the
; unit system after an input field.
*Millimeters label=mm
*Centimeters label=cm
*Meters label=m
*Kilometers label=km
*Inches label=in
*Feet label=ft
*Miles label=mi


; Options dialog
Options dialog title=Opties
Options general tab=Algemeen
Options shortcut keys tab=Sneltoetsen
Options view tab=Venster
Options grid tab=Raster
Options snaps tab=Uitlijnen
Options import/export tab=Importeren/Exporteren
*Options dimensions tab=Dimensions
Language label=Taal:
UI size label=UI formaat:
*Scene browser position label=Scene browser position:
*Scene browser adjacent=Adjacent
*Scene browser inside=Inside
*Scene browser opposite=Opposite
*Side pane position label=Side pane position:
*Side pane right=Right
*Side pane left=Left
*Decimal display label=Decimal display:
; Show trailing zeros controls whether a value like 2.5 with 3 decimals is displayed as 2.5 or 2.500
*Show trailing zeros checkbox=Show trailing zeros
; Fractional display is used for Feet&Inches units, to determine display precision like to nearest 1/2, 1/4, 1/8, etc...
*Fractional display label=Fractional display:
*Template file label=Template file:
*Choose startup template dialog title=Choose Startup Template
*Clear template button=Clear
*Multiple selection label=Multiple selection:
*Multiple selection always=Always
*Multiple selection only with Shift key=Only with Shift key
*Edit .ini file button=Edit .ini file

*Prompt edit ini dialog title=Edit ini file
*Prompt edit ini exit message=For direct editing of the moi.ini configuration file, MoI must exit.
*Prompt edit ini file location label=Ini file located at:
*Prompt edit ini exit moi button=Exit MoI and launch moi.ini

Meshing parameters label=Meshing instellingen
Options mesh angle label=Mesh hoek:
Inflection checkbox=Detail toevoegen aan verbuiging
*Colors section label=Colors
Background color label=Achtergrond kleur:
*3D view projection label=3D view projection:
*3D view projection perspective=Perspective
*3D view projection parallel=Parallel
*Show edit frame checkbox=Show edit frame
Show axis icon checkbox=Toon as icoon
*Show view controls checkbox=Show view controls
*Hidden lines checkbox=Display hidden lines
*Hidden edges on selected only checkbox=Hidden edges on selected only
*Locked objects use alternate color label=Locked objects use alternate color:
*Surface color label=Surface color:
*Edge color label=Edge color:
*Color by style option=By style
*Color by darkened style option=Darkened
*Color by lightened style option=Lightened
*Color by fixed color option=Fixed color
Rotate/Pan/Zoom options button=Roteer/Verschuif/Zoom opties
3D view angles button=Hoek 3d venster
*Axis label options button=Axis labels
*Lighting options button=Lighting options

; Restore defaults dialog - this displays if you push Restore defaults on the options dialog.
Restore defaults dialog title=Standaardwaarden herstellen
Restore defaults label=Standaardwaarden herstellen voor:
Restore defaults everything button=Alles herstellen
Restore defaults current only button=Enkel huidige sectie

; Shortcut keys options
Shortcut keys add button=Toevoegen
Shortcut keys delete button=Verwijderen
*Shortcut keys Key column header=Key
*Shortcut keys Command column header=Command

; Shortcut key dialog, for defining a shortcut key combination.
*Shortcut key dialog title=Shortcut key
*Press shortcut key label=Press shortcut key:

; Import/Export options
*Combine same named objects checkbox=Combine same named objects
OBJ options label=OBJ opties
OBJ scale factor label=Schaal factor:
*OBJ write material assignments checkbox=Write material assignments
*OBJ write .mtl file checkbox=Write .mtl file
OBJ orientation label=Orientatie:
OBJ orientation Y-Up=Y-Boven
OBJ orientation Z-Up=Z-Boven
*LWO options label=LWO options
*LWO scale output units to meters checkbox=Scale output units to meters
*LWO vertex normals style label=Vertex normals style:
STL options label=STL opties
STL file type label=Bestandstype:
STL file type Binary=Binair
STL file type Ascii=Ascii
*STL export units conversion label=Export units conversion:
*STL export units conversion none=None
*FBX options label=FBX options
*FBX version label=FBX version:
*IGES options label=IGES options
*IGES join surfaces on import checkbox=Join surfaces on import
*IGES write solids as label=Write solids as:
*IGES write solids as type 186=Type 186
*IGES write solids as separate surfaces=Separate surfaces
*SubD import options label=SubD import options
*SubD import patch type label=Patch type:
*SubD import patch type FewerPatchesMoreControlPoints=Fewer patches, more control points
*SubD import patch type MorePatchesFewerControlPoints=More patches, fewer control points
*SubD import use materials checkbox=Use materials
*SubD import open boundaries label=Open boundaries:
*SubD import open boundaries keep corners=Keep corners
*SubD import open boundaries smooth=Smooth

; View angles dialog, for setting the angles for the 3D view direction.
; This is a sub-dialog that can be launched from Options / View.
View angle dialog title=Kijkhoek
View angle dialog updown angle label=Boven onder hoek:
View angle dialog leftright angle label=Links rechts hoek:
View angle dialog tilt angle label=Hoek helling:
*View angle dialog field of view label=Field of view:

; Rotate/Pan/Zoom options dialog - this is a sub-dialog that can be launched from the
; main options dialog.
Rotate/Pan/Zoom options dialog title=Roteer/Verschuif/Zoom opties
*Rotation style label=Rotation style:
*Rotation style around world z axis=Rotate around world z axis
*Rotation style free rotation=Free rotation
*Rotation style first person=First person
Reverse rotate button checkbox=Omdraaien roteer knop
Reverse right-click rotate checkbox=Omdraaien roteren rechter muisknop
Reverse pan button checkbox=Omdraaien verschuif knop
Reverse zoom button checkbox=Omdraaien zoom knop
Reverse scroll wheel checkbox=Omdraaien scroll-wiel
*Rotate with middle button checkbox=Rotate with middle button
*Link ortho views checkbox=Link ortho views
View button sensitivity label=Vensterknop gevoeligheid
Zoom sensitivity label=Zoomen:
Pan sensitivity label=Schuiven:
Rotate sensitivity label=Roteren:
3Dconnexion options label=3Dconnexion opties
3Dconnexion reverse rotation checkbox=Rotatie omdraaien
3Dconnexion reverse pan checkbox=Schuiven omdraaien
3Dconnexion reverse zoom checkbox=Zoomen omdraaien
3Dconnexion rotation speed label=Rotatiesnelheid:
3Dconnexion pan speed label=Schuifsnelheid:
3Dconnexion zoom speed label=Zoomsnelheid:
3Dconnexion swap pan and zoom checkbox=Schuiven en zoomen omdraaien
3Dconnexion allow rotation tilt checkbox=Helling rotatie toestaan
3Dconnexion swap twist and tilt checkbox=Draaien en hellen omdraaien
*3Dconnexion reverse roll checkbox=Reverse roll
*MultiTouch options label=MultiTouch options
*MultiTouch rotate ortho views checkbox=Rotate ortho views
*MultiTouch swap 3D rotate and pan checkbox=Swap 3D rotate and pan
*Multitouch allow 3D rotation tilt checkbox=Allow 3D rotation tilt

; Axis label options dialog - this is a sub-dialog that can be launched from the
; main options dialog and allows someone to change what directions are labeled as
; x y and z. For example someone can change z to be forwards instead of up.
*Axis label options dialog title=Axis label options
*Axis options top view horizontal label=Top view horizontal:
*Axis options top view vertical label=Top view vertical:
*Axis options elevation label=Elevation:

; Lighting options dialog - launched from Options / View / Lighting options.
*Lighting options dialog title=Lighting options
*Lighting style label=Lighting style:
*Lighting style default=Default key + fill lights
*Lighting style more fill=Key + more fill
*Lighting style less fill=Key + less fill
*Lighting style key only=Key light only
*Lighting style custom levels=Custom key + fill levels
*Lighting style hemispheric=Hemispheric
*Lighting style headlight=Headlight
*Key light level label=Key light level:
*Fill light level label=Fill light level:
*Specular highlights check button=Specular highlights
*Specular brightness label=Brightness:
*Specular focus size label=Focus size:
*Metallic lighting check button=Metallic lighting
*Fixed light positions check button=Fixed light positions

; "Property preset:" label shown at the top of Options > Dimensions
*Dimensions options property preset label=Property preset:

; Shorter "Preset:" label shown in dimension commands.
*Dimension preset label=Preset:

; Save changes dialog - this is the dialog that is displayed when you exit MoI if you
; have made changes to the model.
Prompt save changes dialog title=Wijzigingen opslaan?
This file has changed=Het bestand is gewijzigd.
Save changes button=Wijzigingen bewaren
Discard changes button=Wijzigingen negeren

; Loading file UI - shown in the command options area when a file is being loaded.
*Loading file title=Loading file
*Loading file scanning=Scanning
*Loading file processing objects=Processing objects
*Loading file joining=Joining

; View controls panel at the bottom center of a viewport
Area view button=Gebied
Zoom view button=Zoomen
Pan view button=Schuiven
Rotate view button=Roteren
Reset view button=Herstellen

; Prompts for zoom area
Zoom area prompt1=Selecteer middelpunt
Zoom area prompt2=Selecteer hoek

; Prompt for hide to select which objects to show
Hide select prompt=Sel. te tonen objecten of gereed voor alles
*Unlock select prompt=Select objects to unlock or done to unlock all

; Drag & Drop options dialog - this dialog is displayed when using drag/drop to drop a file
; from explorer - the prompt asks whether the user wants to open the file (replace existing
; content) or merge the file (keep existing content).
*Drag & drop options dialog title=Drag & Drop options
*Drag & Drop open file button=Open file
*Drag & Drop merge file button=Merge file

; Opening a template uses the regular File open dialog, but uses this title at the top.
*Open template file dialog title=Open Template

; The ImportPart command uses the regular File open dialog, with this title at the top.
*Import part file dialog title=Import Part

; Dialog title for the ImportSubD file open dialog.
*Import SubD dialog title=Import SubD

; Edit name dialog - a dialog that is shown for editing different name values.
*Edit name dialog name label=Name:


; Properties panel - this is the panel in the upper-right corner of the window
; that shows up when in selection mode to give some information on and allow you
; to set properties on the selected objects.

*Properties panel edit name dialog title=Edit object name

; "Unnamed" is displayed in the name field for objects that have no name assigned yet.
*Properties panel unnamed=Unnamed

; "(varies)" is displayed in the name field for a multiple selection of objects with different name values.
*Properties panel varies=(varies)

; Short types are a small type label that is displayed on the same line as the object name.
; They must be kept to a very small length by abbreviations or leaving out letters in some cases.
*Properties panel short type Curve=Curve
*Properties panel short type Curves=%1% Curves
*Properties panel short type Closed crv=Closed crv
*Properties panel short type Closed crvs=%1% Closed crvs
*Properties panel short type Edge=Edge
*Properties panel short type Edges=%1% Edges
*Properties panel short type Closed edge=Closed edge
*Properties panel short type Closed edges=%1% Closed edges
*Properties panel short type Face=Face
*Properties panel short type Faces=%1% Faces
*Properties panel short type Surface=Surface
*Properties panel short type Surfaces=%1% Surfaces
*Properties panel short type Joined srf=Joined srf
*Properties panel short type Joined srfs=%1% Joined srfs
*Properties panel short type Solid=Solid
*Properties panel short type Solids=%1% Solids
*Properties panel short type Point=Point
*Properties panel short type Points=%1% Points
*Properties panel short type Linear dimension=Linear dim
*Properties panel short type Linear dimensions=%1% Linear dims
*Properties panel short type Radial dimension=Radial dim
*Properties panel short type Radial dimensions=%1% Radial dims
*Properties panel short type Angular dimension=Angular dim
*Properties panel short type Angular dimensions=%1% Angular dims
*Properties panel short type Leader=Leader
*Properties panel short type Leaders=%1% Leaders
*Properties panel short type Annotation text=Text
*Properties panel short type Annotation texts=%1% Texts
*Properties panel short type Objects=%1% Objects

*Properties panel size label=Size:
*Properties panel radius label=Radius:
*Properties panel diameter label=Diameter:
*Properties panel length label=Length:
*Properties panel height label=Height:

*Properties panel details button=Details...
*Properties panel detailed type Open curve=Open curve
*Properties panel detailed type Closed curve=Closed curve
*Properties panel detailed type 1 open curve=1 open curve
*Properties panel detailed type 1 closed curve=1 closed curve
*Properties panel detailed type N curves=%1% curves
*Properties panel detailed type N open curves=%1% open curves
*Properties panel detailed type N closed curves=%1% closed curves
*Properties panel detailed type Line=Line
*Properties panel detailed type Polyline=Polyline
*Properties panel detailed type Circle=Circle
*Properties panel detailed type Arc=Arc
*Properties panel detailed type Ellipse=Ellipse
*Properties panel detailed type Elliptical arc=Elliptical arc
*Properties panel detailed type 1 line=1 line
*Properties panel detailed type 1 polyline=1 polyline
*Properties panel detailed type 1 circle=1 circle
*Properties panel detailed type 1 arc=1 arc
*Properties panel detailed type 1 ellipse=1 ellipse
*Properties panel detailed type 1 elliptical arc=1 elliptical arc
*Properties panel detailed type N lines=%1% lines
*Properties panel detailed type N polylines=%1% polylines
*Properties panel detailed type N circles=%1% circles
*Properties panel detailed type N arcs=%1% arcs
*Properties panel detailed type N ellipses=%1% ellipses
*Properties panel detailed type N elliptical arcs=%1% elliptical arcs
*Properties panel detailed type Planar=Planar
*Properties panel detailed type 1 planar=1 planar
*Properties panel detailed type N planar=%1% planar
*Properties panel detailed type 1 segment=1 segment
*Properties panel detailed type N segments=%1% segments
*Properties panel detailed type Solid=Solid
*Properties panel detailed type Open joined surface=Open joined surface
*Properties panel detailed type Open surface=Open surface
*Properties panel detailed type 1 solid=1 solid
*Properties panel detailed type 1 open joined surface=1 open joined surface
*Properties panel detailed type 1 open surface=1 open surface
*Properties panel detailed type N solids=%1% solids
*Properties panel detailed type N open joined surfaces=%1% open joined surfaces
*Properties panel detailed type N open surfaces=%1% open surfaces
*Properties panel detailed type 1 joined edge=1 joined edge
*Properties panel detailed type 1 naked edge=1 naked edge
*Properties panel detailed type 1 face=1 face
*Properties panel detailed type N joined edges=%1% joined edges
*Properties panel detailed type N naked edges=%1% naked edges
*Properties panel detailed type N faces=%1% faces
*Properties panel detailed type Open edge=Open edge
*Properties panel detailed type Closed edge=Closed edge
*Properties panel detailed type Joined=Joined
*Properties panel detailed type Naked=Naked
*Properties panel detailed type 1 open edge=1 open edge
*Properties panel detailed type 1 closed edge=1 closed edge
*Properties panel detailed type N edges=%1% edges
*Properties panel detailed type N open edges=%1% open edges
*Properties panel detailed type N closed edges=%1% closed edges
*Properties panel detailed type 1 joined=1 joined
*Properties panel detailed type 1 naked=1 naked
*Properties panel detailed type N joined=%1% joined
*Properties panel detailed type N naked=%1% naked
*Properties panel detailed type Face=Face
*Properties panel detailed type Point=Point
*Properties panel detailed type 1 point=1 point
*Properties panel detailed type N points=%1% points
*Properties panel detailed type Linear dimension=Linear dimension
*Properties panel detailed type Radial dimension=Radial dimension
*Properties panel detailed type Angular dimension=Angular dimension
*Properties panel detailed type Leader=Leader
*Properties panel detailed type Annotation text=Annotation text
*Properties panel detailed type 1 annotation=1 annotation
*Properties panel detailed type N annotations=%1% annotations
*Properties panel detailed type 1 linear dimension=1 linear dimension
*Properties panel detailed type N linear dimensions=%1% linear dimensions
*Properties panel detailed type 1 radial dimension=1 radial dimension
*Properties panel detailed type N radial dimensions=%1% radial dimensions
*Properties panel detailed type 1 angular dimension=1 angular dimension
*Properties panel detailed type N angular dimensions=%1% angular dimensions
*Properties panel detailed type 1 leader=1 leader
*Properties panel detailed type N leaders=%1% leaders
*Properties panel detailed type 1 annotation text=1 annotation text
*Properties panel detailed type N annotation texts=%1% annotation texts
*Properties panel detailed type 1 edit point=1 edit point
*Properties panel detailed type N edit points=%1% edit points
*Properties panel detailed Curve properties=Curve properties
*Properties panel detailed Solid properties=Solid properties
*Properties panel detailed Surface properties=Surface properties
*Properties panel detailed Solid/Surface properties=Solid/Surface properties
*Properties panel detailed Annotation properties=Annotation properties
*Properties panel detailed copied to the clipboard message=Copied to the clipboard
*Properties panel detailed curve length label=Length:
*Properties panel detailed surface area label=Area:
*Properties panel detailed solid volume label=Volume:
*Properties panel detailed calc button=Calc
*Properties panel detailed annotation value label=Value:
*Properties panel detailed annotation text label=Text:
*Properties panel detailed annotation font label=Font:
*Properties panel detailed annotation font none=None (using UI font)...
*Properties panel detailed annotation font light=Light
*Properties panel detailed annotation font demibold=DemiBold
*Properties panel detailed annotation font bold=Bold
*Properties panel detailed annotation font black=Black
*Properties panel detailed annotation font italic=Italic
*Properties panel detailed annotation font oblique=Oblique
*Properties panel detailed annotation font underline=Underline
*Properties panel detailed annotation font strikeout=Strikeout
*Properties panel detailed annotation text display mode label=Display:
*Properties panel detailed annotation text display mode above line=Above line
*Properties panel detailed annotation text display mode inline=Inline
*Properties panel detailed annotation text display mode screen aligned=Screen aligned
*Properties panel detailed annotation text align label=Align:
*Properties panel detailed annotation text align left=Left
*Properties panel detailed annotation text align center=Center
*Properties panel detailed annotation text align right=Right
*Properties panel detailed annotation text align justified=Justified
*Properties panel detailed annotation scaling label=Scaling:
*Properties panel detailed annotation scaling by screen size=By screen size
*Properties panel detailed annotation scaling by model units=By model units
; If annotations with scaling of both "By screen size" and "By model units" are selected,
; then detailed object properties dialog will show Scaling: (varies) and an additional
; dropdown will appear for whether to show properties for "Screen size" or "Model units".
*Properties panel detailed annotation show properties for label=Show properties for:
*Properties panel detailed annotation show properties for screen size=Screen size
*Properties panel detailed annotation show properties for model units=Model units
*Properties panel detailed annotation height label=Height:
*Properties panel detailed annotation text anchor label=Anchor:
*Properties panel detailed annotation textbox label=Textbox:
*Properties panel detailed annotation textbox outline label=Outline:
*Properties panel detailed annotation textbox outline none=None
*Properties panel detailed annotation textbox outline rect=Rect
*Properties panel detailed annotation textbox outline bracket=Bracket
*Properties panel detailed annotation textbox outline width label=Width:
*Properties panel detailed annotation textbox padding x label=Padding x:
*Properties panel detailed annotation textbox padding y label=y:
*Properties panel detailed annotation arrows label=Arrows:
*Properties panel detailed annotation arrowhead label=Arrowhead:
*Properties panel detailed annotation arrowhead Arrow=Arrow
*Properties panel detailed annotation arrowhead Open arrow=Open arrow
*Properties panel detailed annotation arrowhead Tick=Tick
*Properties panel detailed annotation arrowhead Dot=Dot
*Properties panel detailed annotation arrowhead Barb=Barb
*Properties panel detailed annotation arrowhead arrow length label=Arrow length:
*Properties panel detailed annotation arrowhead arrow width factor label=Width factor:
*Properties panel detailed annotation arrowhead open arrow length label=Open length:
*Properties panel detailed annotation arrowhead open arrow width factor label=Width factor:
*Properties panel detailed annotation arrowhead tick length label=Tick length:
*Properties panel detailed annotation arrowhead tick line width label=Tick line width:
*Properties panel detailed annotation arrowhead dot size label=Dot size:
*Properties panel detailed annotation arrowhead reverse check box=Reverse
*Properties panel detailed annotation arrowhead position label=Position:
*Properties panel detailed annotation arrowhead position inside=Inside
*Properties panel detailed annotation arrowhead position outside=Outside
*Properties panel detailed annotation dimension lines label=Dim lines:
*Properties panel detailed annotation dimension extension length label=Extension length:
*Properties panel detailed annotation dimension extension gap label=Extension gap:
*Properties panel detailed annotation dimension arrow line extension label=Arrow line extension:
*Properties panel detailed annotation dimension outside line length label=Outside line length:
*Properties panel detailed annotation dimension draw line across check box=Draw line across
*Properties panel detailed annotation formatting label=Formatting:
*Properties panel detailed annotation radial dimension label=Radial dimension:
*Properties panel detailed annotation radial dimension type label=Radial type:
*Properties panel detailed annotation radial dimension type Radius=Radius
*Properties panel detailed annotation radial dimension type Diameter=Diameter
*Properties panel detailed annotation radial dimension cross size label=Cross size:

*Edit size title=Edit size
*Edit size x label=X:
*Edit size y label=Y:
*Edit size z label=Z:
*Edit size maintain proportions checkbox=Maintain proportions

; "Various styles" is displayed as the current style name when there is a multiple
; selection of objects with different styles.
*Styles various styles=Various styles

; A slightly longer name for the default style is displayed in the top-level UI in the properties panel.
*Style name default long=Default style

*Style name default=Default
*Style name red=Red
*Style name orange=Orange
*Style name green=Green
*Style name cyan=Cyan
*Style name blue=Blue
*Style name magenta=Magenta

; Style menu, launched from the properties panel that can be used to change the style of the current selected objects.
*Style menu Add new style button=Add new style
*Style menu Edit styles button=Edit styles

; Edit styles dialog
*Edit styles dialog title=Edit styles
*Edit styles Add button=Add
*Edit styles Delete button=Delete
*Edit styles Edit button=Edit
*Edit styles Up button=Up
*Edit styles Down button=Down

; Edit style dialog
*Edit style dialog title=Edit style
*Add style dialog title=Add style
*Edit style name label=Name:
*Edit style color label=Color:

; Object properties dialog, shown with the "Details..." button in the properties panel.
*Object properties dialog title=Object properties
; "Nothing selected" shown when object properties dialog is open but nothing is selected.
*Object properties dialog Nothing selected=Nothing selected
; "A command is running" shown when object properties dialog is open but a command is currently running.
*Object properties dialog A command is running=A command is running
*Object properties dialog style label=Style:
*Object properties dialog type label=Type:

; Add dimension preset dialog, launched from Options > Dimensions > "Add"
*Add dimension preset dialog title=Add dimension preset
*Add dimension preset copy from label=Copy from:


; Scene browser

; In inline mode the scene browser shows up inside the side pane, with this text as its heading.
*Scene browser inline header=Scene browser

; In adjacent mode there is a button at the bottom of the side pane to show/hide the browser pane.
*Scene browser show/hide button=Browser

*Scene browser groups section=Groups

*Scene browser objects section=Objects
*Scene browser no named objects=No named objects

*Scene browser types section=Types
*Scene browser type Curves=Curves
*Scene browser type Surfaces=Surfaces
*Scene browser type Solids=Solids
*Scene browser type Edges=Edges
*Scene browser type Faces=Faces
*Scene browser type Points=Points
*Scene browser type Annotations=Annotations
*Scene browser type Linear Dimensions=Linear dims
*Scene browser type Radial Dimensions=Radial dims
*Scene browser type Angular Dimensions=Angular dims
*Scene browser type Leaders=Leaders
*Scene browser type AnnotationTexts=Texts
*Scene browser type All objects=All objects
*Scene browser type Selected=Selected
*Scene browser type Unselected=Unselected

*Scene browser styles section=Styles

*Scene browser styles menu title=Style tools
*Scene browser add new style menu item=Add new style
*Scene browser edit styles menu item=Edit styles
*Scene browser add default styles menu item=Add default styles


; Common prompts for radius/diameter related commands, for example circle, cone, cylinder, sphere.
; These can be switched between picking the radius or diameter.
Pick radius prompt=Selecteer radius
Pick diameter prompt=Selecteer diameter
Radius button=Radius
Diameter button=Diameter
; Pick center point prompt is also used in rectangle/box from center.
Pick center point prompt=Selecteer middelpunt
; Circle and CircleDiameter have a vertical option
Vertical checkbox=Verticaal
Angle label=Hoek:
*Length label=Length:
*Circumference label=Circum:
Elliptical checkbox=Ovaal

; Error dialog shown if a .3dm file that's trying to be opened is a Rhino v6 or higher type file.
*3DM version error dialog title=3DM version error
*3DM version error dialog text=This is a v%1% 3DM file, but MoI only supports v5 or lower.<br>Use SaveAs to a v5 3DM file to bring this file into MoI.

; Mac top menu bar
*New window menu item=New Window
*Window menu=Window
*Untitled window menu item=Untitled

; Add Point command
Add point prompt=Sel. plek voor toevoegen punt
*Symmetrical checkbox=Symmetrical

; Align command
Align select prompt=Select objects to align
Align point prompt=Sel. uitlijn punt
Align horizontal center=Horiz midden
Align horizontal top=Boven
Align horizontal bottom=Onder
Align vertical center=Vert midden
Align vertical left=Links
Align vertical right=Rechts
*Align move as group checkbox=Move as group

; AnnotationText command
*AnnotationText pick text base point prompt=Pick text base point
*AnnotationText options prompt=Text options

; ArrayCircular command
ArrayCircular select prompt=Sel. de te vermenigvuldigen obj.
ArrayCircular center prompt=Sel. midden punt
ArrayCircular options prompt=Opties aanpassen
ArrayCircular item count label=Aantal:
ArrayCircular fill angle label=Graden
ArrayCircular step angle label=Hoek stappen
ArrayCircular vertical step label=Verticale stappen:
ArrayCircular radial step label=Radiale stappen:

; ArrayCurve command
ArrayCurve select objects prompt=Sel.de te vermenigvuldigen obj.
ArrayCurve select path prompt=Sel. pad lijn
ArrayCurve options prompt=Aanpassen opties
ArrayCurve item count label=Aantal:
ArrayCurve distance label=Afstand:
ArrayCurve rotation label=Rotatie:
; Array curve also uses the "freeform" and "flat" labels from sweep, and also adds "none".
ArrayCurve rotation none=Geen
*ArrayCurve base snap point=Base
*ArrayCurve offset snap point=Offset
*ArrayCurve align to surface button=Align to surface
*ArrayCurve align to surface select prompt=Select surface for alignment

; ArrayDir command
ArrayDir select prompt=Sel.de te vermenigvuldigen obj.
ArrayDir base point prompt=Sel. basis punt
ArrayDir offset point prompt=Sel. offset punt
*ArrayDir extent or offset point prompt=Pick extent or offset point
*ArrayDir mode Offset, Count=Offset, Count
*ArrayDir mode Extent, Count=Extent, Count
*ArrayDir mode Offset, Extent=Offset, Extent

; ArrayGem command
*ArrayGem select prompt=Select objects to array and base circle
*ArrayGem select path curves and surface prompt=Select path curves and surface
*ArrayGem options prompt=Adjust options
*ArrayGem spacing label=Spacing:

; ArrayGrid command
ArrayGrid select prompt=Sel.de te vermenigvuldigen obj.
ArrayGrid num copies prompt=Sel. aantal kopieen
ArrayGrid spacing or corner prompt=Sel. afstand of kies cell hoek 1
ArrayGrid end corner prompt=Sel cell hoek 2
ArrayGrid x/y spacing prompt=Sel. x/y afstand
ArrayGrid z spacing prompt=Sel. z afstand
ArrayGrid number x label=Aantal in X:
ArrayGrid number y label=Aantal in Y:
ArrayGrid number z label=Aantal in Z:
ArrayGrid x spacing label=X afstand:
ArrayGrid y spacing label=Y afstand:
ArrayGrid z spacing label=Z afstand:

; Arc3pt command
Arc3pt prompt1=Sel. beginpunt
Arc3pt prompt2=Sel punt op boog
Arc3pt prompt3=Sel. eindpunt
Arc3pt style label=Stijl:
Arc3pt start end on style=Start, Einde, Op
Arc3pt start on end style=Start, Einde, Op

; ArcCenter command
ArcCenter center prompt=Sel. midden van boog
ArcCenter start prompt=Sel. start van boog
ArcCenter end prompt=Sel. einde van boog

; ArcContinue command
ArcContinue start prompt=Sel. punt bij einde boog
ArcContinue end prompt=Sel. einde boog

; ArcTangent command - prompts also used by CircleTangent
ArcTangent prompt1=Sel. 1e punt op boog
ArcTangent prompt2=Sel. 2e punt op boog
ArcTangent keep prompt=Sel. te bewaren gedeelte

; Blend command
Blend select prompt=Sel. lijnen of randen voor Blend
Blend adjust prompt=Blend instellingen aanpassen
*Blend add first sync point prompt=Pick sync point on first side
*Blend add second sync point prompt=Pick sync point on other side
*Blend planar sections start line prompt=Start of line parallel to planar sections
*Blend planar sections end line prompt=End of line parallel to planar sections
Blend continuity label=Overgang:
Blend continuity tangent=Raaklijn (G1)
Blend continuity curvature=Bolling (G2)
Blend continuity G3=G3
Blend bulge label=Bolling:
*Add sync points button=Add sync points
*Planar sections button=Planar sections

; BooleanDifference command
BooleanDifference prompt1=Sel. basis object
BooleanDifference prompt2=Sel. objecten voor het verschil
*BooleanDifference keep objects checkbox=Keep objects

; BooleanIntersection command
BooleanIntersection prompt1=Sel. basis object
BooleanIntersection prompt2=Sel. objecten om uit te snijden
*BooleanIntersection union sets checkbox=Union sets

; BooleanUnion command
BooleanUnion prompt=Sel. objecten om samen te voegen

; BooleanMerge command
BooleanMerge prompt=Sel. samen te voegen objecten

; BoundingBox command
*BoundingBox select prompt=Select objects to frame

; Some stuff common to rectangle and box commands
Pick corner point prompt=Sel. hoekpunt
Pick other corner prompt=Sel. andere hoek
Pick extrusion prompt=Kies uitschuiving
Width label=Breedte:
;Height label is also used for cylinder and cone
Height label=Hoogte:
Extrusion label=Uitschuiving:
Square snap=Vierkant
Cube snap=Kubus
Rect 3pts base point prompt=Sel. basis punt
Rect 3pts width point prompt=Sel. breedte punt
Rect 3pts height point prompt=Sel. hoogte punt
Pick round radius prompt=Sel. ronding radius
Rounded corners checkbox=Afgeronde hoeken
Round rect radius label=Radius:

; Chamfer command
Chamfer select prompt=Sel. obj om af te ronden/vlakken
; The select corners prompt is used when chamfering the corners of a single curve,
; such as a rectangle. This same prompt is also used by fillet
Select corners prompt=Sel. hoeken of kies Gereed voor alle
Chamfer distance prompt=Sel. afhoek afstand
Chamfer distance label=Afstand:
Chamfer distance1 label=Afstand 1:
Chamfer distance2 label=Afstand 2:
Chamfer use 2 distances checkbox=Gebruik 2 afstanden
Straight corners checkbox=Rechte hoeken

; Circle3pt command
Circle3pt prompt1=Sel. 1e punt van cirkel
Circle3pt prompt2=Sel. 2e punt van cirkel
Circle3pt prompt3=Sel. 3e punt van cirkel

; CircleDiameter command
CircleDiameter prompt1=Sel. 1e diameter punt
CircleDiameter prompt2=Sel. 2e diameter punt

; Cone command - these are also used by the cylinder command
Base point prompt=Sel. basis punt
End point prompt=Sel. eindpunt

; Conic command
*Conic pick start point prompt=Pick start point
*Conic pick end point prompt=Pick end point
*Conic pick apex point prompt=Pick apex point
*Conic pick through pt or rho value prompt=Pick through point or rho value
*Conic rho value label=Rho value:

; Copy (Transform/copy) command
Transform copy select prompt=Sel. te kopieren objecten
Move/Copy base point prompt=Sel. basis punt
Move/Copy target point prompt=Sel. doel punt

; Copy to clipboard (Edit/copy) command
Copy clipboard select prompt=Sel. obj om naar klembord te kopieren

; Copy to clipboard with origin command (right-click on Edit/copy or Ctrl+Shift+C)
; This variant lets the user pick an origin point which is used with
; the alternative paste that allows orienting the pasted in objects.
*Copy clipboard pick origin point prompt=Pick origin point

; CPlane

; CPlane coordinate display prefix is the character that is added to the start
; of a point display to indicate that it is the cplane coordinate system instead
; of the world coordinate system, like c 5 1 0  - this type of display will happen
; if a custom cplane is set up and enabled for all views.
CPlane coordinate display prefix=c

*CPlane pick origin prompt=Pick CPlane origin
*CPlane adjust axis orientation prompt=Adjust axis orientation
*CPlane apply to all views checkbox=Apply to all views
*CPlane orient ortho views checkbox=Orient ortho views
*CPlane reset button=Reset CPlane
*CPlane origin label=Origin
*CPlane xaxis label=X axis
*CPlane yaxis label=Y axis
*CPlane zaxis label=Z axis
*Align to objects checkbox=Align to objects
*Flip aligned z axis checkbox=Flip aligned z axis

; Curve command - also used for InterpCurve and Polyline commands
Pick start point prompt=Sel. beginpunt
Pick next point prompt=Sel. volgend punt
Make corner point checkbox=Maak hoek punt
Closed snap=Gesloten

; Cut command - note cut command does not have a button but it is accessible through ctrl+X
Cut select prompt=Sel. obj om naar klembord te snijden

; DimHorizontal, DimVertical, DimAligned commands
*Dim pick dimension base point prompt=Pick dimension base point
*Dim select curve prompt=Select curve
*Dim pick dimension end point prompt=Pick dimension end point
*Dim pick dimension location prompt=Pick dimension location
*Dim from object button=From object
*Dim project to cplane checkbox=Project to cplane

; DimAngle command
*DimAngle pick center point prompt=Pick center point
*DimAngle pick first dimension point prompt=Pick first dimension point
*DimAngle pick second dimension point prompt=Pick second dimension point
*DimAngle select first line prompt=Select first line
*DimAngle select second line prompt=Select second line
*DimAngle from lines button=From lines

; DimRadius command
*DimRadius select prompt=Select curve for radius dimension
*DimRadius pick arrow location prompt=Pick arrow location
*DimRadius pick text location prompt=Pick text location
*DimRadius type label=Type:
*DimRadius type from preset=From preset
*DimRadius type radius=Radius
*DimRadius type diameter=Diameter

; Ellipse command
Ellipse pick first axis prompt=Sel. 1e as
Ellipse pick second axis prompt=Sel. 2e as

; EllipseDiameter command
EllipseDiameter prompt1=Sel. 1e as beginpunt
EllipseDiameter prompt2=Sel. 1e as eindpunt
EllipseDiameter prompt3=Sel. 2e as eindpunt

; ExplodeMove command
*ExplodeMove select prompt=Select objects to explode
*ExplodeMove pick scale factor prompt=Pick scale factor
*ExplodeMove scale label=Scale:
*ExplodeMove pick origin=Pick origin

; Export command
Export select objects prompt=Sel. te exporteren objecten
Choose file name prompt=Selecteer bestandsnaam

; Extend command
Extend select objects prompt=Sel. te verlengen objecten
Extend select boundary objects prompt=Sel. grens objecten
; This next version is used when 2 curves are selected, you can push done in that case to
; extend each of them to meet the other.
Extend select boundary objects mutual prompt=Sel. grens obj of kies Gereed voor wederzijds verlengen

; Extrude command
Extrude select prompt=Sel. lijnen, randen, of zijde om uit te schuiven
Extrude pick extrusion point prompt=Sel. uitschuif punt
Extrude direction prompt1=Sel. 1e richting punt
Extrude direction prompt2=Sel. 2e richting punt
Extrude select path prompt=Sel. pad lijn
Extrude distance label=Afstand:
*Extrude draft angle label=Draft angle:
Extrude cap ends checkbox=Sluit eindes
Extrude both sides checkbox=Beide kanten
*Extrude keep separate checkbox=Keep separate
Extrude set dir button=Kies richting
Extrude set path button=Kies pad
*Extrude to point button=To point
*Extrude tapered button=Tapered
*Extrude unlock direction button=Unlock direction

; Fillet command
Fillet select prompt=Sel. obj om af te ronden
Fillet radius prompt=Sel. afrond radius
*Fillet pick radius points prompt=Pick radius points
Fillet radius label=Radius:
Fillet shape label=Vorm:
Fillet shape Circular=Rond
*Fillet shape constant distance=Const Dist
Fillet shape G1 Blend=G1 Blend
Fillet shape G2 Blend=G2 Blend
Fillet shape G3 Blend=G3 Blend
*Fillet set expander label=Fillet set
*Fillet current set label=Current set:
*Fillet new point set button=New point set
*Fillet linear blend checkbox=Linear blend

; Flip command
*Flip select prompt=Select objects to flip

; Flow command
*Flow select prompt=Select objects to flow
*Flow select base object prompt=Select base curve or surface
*Flow select target curve prompt=Select target curve near matching end
*Flow select target surface prompt=Select target surface near matching edge side
*Flow select target object prompt=Select target object
*Flow options prompt=Flow options
*Flow stretch checkbox=Stretch
*Flow projective checkbox=Projective
*Flow straight checkbox=Straight
*Flow rigid checkbox=Rigid
*Flow flip surface normal checkbox=Flip surface normal

; Helix command
Helix axis start prompt=Sel. begin van as
Helix axis end prompt=Sel. einde van as
Helix start radius and anchor point prompt=Sel. start radius en anker punt
Helix end radius prompt=Sel. eind radius
Helix options prompt=Spiraal opties
Helix flat spiral button=Platte spiraal
Helix start radius label=Begin radius:
Helix end radius label=Eind radius:
Helix tapered checkbox=Taps
Helix turns label=Wentelingen:
Helix pitch label=Uitrekken:
Helix reverse twist checkbox=Wenteling omdraaien

; History command
History select prompt=Sel. objecten
History options prompt=Geschiedenis update opties
History enable update button=Update aanzetten
History disable update button=Update uitzetten

; Image command
Image add=Toevoegen
Image remove=Verwijderen
*Image align=Align
Image hide=Verbergen
Image show=Tonen
*Image properties=Properties
Image draw label=Weergeven:
Image draw below objects=Onder objecten
Image draw with objects=Tussen objecten
Image draw above objects=Boven objecten
Image show in label=Tonen in:
Image show in all views=Alle vensters
Image show in ortho only=alleen in ortho
Image transparency label=Zichtbaarheid:
*Image align pick image base point prompt=Pick image base point
*Image align pick image reference point prompt=Pick image reference point
*Image align pick target base point prompt=Pick target base point
*Image align pick target reference point prompt=Pick target reference point
*Image properties dialog title=Image properties
*Image properties file label=Image file:
*Image properties embed checkbox=Embed image data in 3DM file
*Image properties reload image button=Reload image

; Inset command
*Inset select prompt=Select faces to inset
*Inset options prompt=Inset options
*Inset thickness label=Thickness:
*Inset direction label=Direction:
*Inset direction inwards=Inwards
*Inset direction outwards=Outwards
*Inset expand checkbox=Expand
*Inset use separate height checkbox=Use separate height
*Inset height label=Height:
*Inset grooved checkbox=Grooved
*Inset groove width label=Width:

; Intersect command
Intersect select prompt=Sel. te snijden objecten

; Isocurve command
*Isocurve select face prompt=Select face
*Isocurve pick point prompt=Pick a point
*Isocurve direction label=Direction:
*Isocurve direction both=Both
*Isocurve direction u=U
*Isocurve direction v=V

; Join command
Join select prompt=Sel. obj om samen te voegen

; Leader command
*Leader pick leader arrow tip prompt=Pick leader arrow tip
*Leader pick next leader point prompt=Pick next leader point
*Leader options prompt=Leader options

; Line command
Line start point prompt=Sel. beginpunt
Line end point prompt=Sel. eindpunt
*Line both sides checkbox=Both sides

; Loft command
Loft select prompt=Sel. lijnen voor loft
Loft options prompt=Loft opties
Loft style label=Loft Stijl:
Loft style normal=Normaal
Loft style loose=Losjes
Loft style straight=Recht
Loft closed checkbox=Gesloten
; The below items are used by both Loft and Sweep for controlling how profiles are combined together.
Profiles label=Profiel:
Profile synchronize auto=Auto
Profile synchronize exact=Precies
Profile synchronize refit=Aangepast
Profile synchronize num points=# Punten
Profile point count label=Puntenaantal:

; Make2D command
*Make2D select prompt=Select objects for 2D drawing generation
*Make2D options prompt=Make2D options
*Make2D generate hidden checkbox=Generate hidden
*Make2D resolution label=Resolution:

; Merge command
*Merge select prompt=Select objects to merge

; Mirror command
Mirror select prompt=Sel. obj om te spiegelen
Mirror start point prompt=Sel. beginpunt
Mirror end point prompt=Sel. eindpunt
*Delete input objects=Delete input objects

; Move command - some prompts are shared with Transform/Copy
Move select prompt=Sel. obj om te verplaatsen
*Move from bounding box center button=Bounding box center
*Move distance from edge button=Distance from edge

; Network command
Network select prompt=Sel. lijnen voor netwerk
*Network options prompt=Network options
*Network mode label=Mode:
*Network normal mode=Normal
*Network lighter mode=Lighter
*Network exact mode=Exact
*Network custom mode=Custom
*Network uniform mode=Uniform

; Nsided command
*Nsided select prompt=Select closed loop of edges to blend
*Nsided options prompt=NSided options
*Point count U label=Point count U:
*Point count V label=Point count V:

; Offset command
Offset select prompt=Sel. objecten voor offset
Offset pick offset point prompt=Sel. offset punt
Offset pick side prompt=Sel. offset zijde
Offset distance prompt=Sel. offset afstand
Offset curve mode label=Modus:
Offset through point curve mode=Door punt
Offset by distance curve mode=Door afstand
Offset distance label=Afstand:
Offset curve corner style label=Hoeken:
Offset curve corner sharp=Scherp
Offset curve corner round=Rond
Offset curve trim checkbox=Bijsnijden
Offset curve both sides checkbox=Beide kanten
*Offset curve cap ends checkbox=Cap ends
Offset solid flip checkbox=Omdraaien

; Orient command
*Orient select prompt=Select objects to orient
*Orient pick base origin=Pick base origin
*Orient adjust base axis orientation prompt=Adjust base axis orientation
*Orient pick target origin=Pick target origin
*Orient adjust target axis orientation prompt=Adjust target axis orientation

; OrientLineToLine command
*OrientLineToLine pick base line start point=Pick base line start point
*OrientLineToLine pick base line end point=Pick base line end point
*OrientLineToLine pick target line start point=Pick target line start point
*OrientLineToLine pick target line end point=Pick target line end point
*OrientLineToLine scaling label=Scaling:
*OrientLineToLine scale uniform=Uniform
*OrientLineToLine scale stretch=Stretch
*OrientLineToLine scale none=None

; OrientViewToView command
*OrientViewToView click in source view prompt=Click in source view
*OrientViewToView click in target view prompt=Click in target view

; PlanarSrf command
PlanarSrf select prompt=Sel. objecten

; Point command
Point prompt=Sel. punt

; Polygon command
Polygon radius point prompt=Sel. radius punt
Polygon sides label=Zijdes:
*Polygon circumscribed checkbox=Circumscribed

; PolygonEdge command
PolygonEdge start prompt=Sel. start van rand
PolygonEdge end prompt=Sel. einde van rand
PolygonEdge flip checkbox=Omdraaien

; PolygonStar command
PolygonStar first star point prompt=Sel. beginpunt
PolygonStar second star point prompt=Sel. 2e ster punt
PolygonStar style label=Stijl:
PolygonStar style auto=Auto
PolygonStar style custom=Aangepast

; Project command
Project select objects prompt=Sel. te projecteren objecten
Project select target prompt=Sel. projectie doel
Project direction start prompt=Sel. begin projectie richting
Project direction end prompt=Sel. einde projectie richting
Project adjust options prompt=Projectie opties aanpassen
Project mode label=Modus:
Project mode direction=Richting
Project mode closest pt=Dichtstbijz. punt
*Project use cplane button=Use CPlane

; Rebuild command
*Rebuild select prompt=Select curves to rebuild
*Rebuild options prompt=Rebuild options
*Rebuild mode label=Mode:
*Rebuild refit to tolerance mode=Refit
*Rebuild num points mode=# Points
*Rebuild endpoints mode=Endpoints
*Rebuild tolerance label=Tolerance:
*Rebuild point count label=Point count:
*Rebuild keep corners checkbox=Keep corners
*Rebuild break angle label=Break angle:

; Revolve command
Revolve select prompt=Sel. lijnen voor revolve
Revolve axis start prompt=Sel. revolve as beginpunt
Revolve axis end prompt=Sel. revolve as eindpunt

; RailRevolve command
RailRevolve select profile prompt=Sel. profiel lijn
RailRevolve select rail prompt=Sel. rail lijn

; RemoveDuplicates command
*Remove duplicates select prompt=Select objects for duplicate removal
*Remove duplicates options prompt=Remove duplicates options

; Rotate command
Rotate select prompt=Sel. te roteren objecten
Rotate center prompt=Sel. centrum van rotatie
Rotate first ref prompt=Sel. 1e referentie punt
Rotate second ref prompt=Sel. 2e referentie punt
Make copies checkbox=Maak kopieen

; RotateAxis command
RotateAxis start prompt=Sel. begin van rotatie as
RotateAxis end prompt=Sel. einde van rotatie as

; Scale command
Scale select prompt=Sel. te schalen objecten
		Scale origin prompt=Selecteer 
Scale first ref prompt=Sel. 1e referentie punt
Scale second ref prompt=Sel. 2e referentie punt
Scale factor label=Schaal factor:

; Scale1d command
Scale1d direction prompt=Sel. schaal richting

; Separate command
Separate select prompt=Sel. de te scheiden objecten

; Shell command
Shell select prompt=Sel. objecten voor shell
Shell thickness prompt=Sel. dikte
Shell thickness label=Dikte:
Shell direction label=Richting:
Shell direction normal=Normal
Shell direction flip=Omdraaien
Shell direction centerline=Middenlijn

; ShowPoints command
*ShowPoints select objects prompt=Select objects for point display

; Silhouette command
*Silhouette select prompt=Select objects to silhouette
*Silhouette options prompt=Silhouette options
*View label=View:
*Include edges checkbox=Include edges

; SketchCurve command
SketchCurve prompt=Klik en sleep om een lijn te maken

; Sweep command
Sweep select profiles prompt=Sel. profielen
*Sweep select rails prompt=Select rails
Sweep options prompt=Sweep opties
Sweep pick scaling rail prompt=Sel. schaling rail
*Sweep pick flat direction start prompt=Pick flat direction start
*Sweep pick flat direction end prompt=Pick flat direction end
; Twist and ends options show up for one-rail sweeping
Sweep twist label=Draaien:
Sweep freeform twist=Vrije vorm
Sweep flat twist=Plat
*Sweep set flat direction button=Set flat direction
Sweep ends label=Eindigd:
Sweep ends regular=Normaal
Sweep ends pointy end=Gepunt einde
Sweep ends pointy start=Gepunt begin
Sweep ends both pointy=Beide gepunt
; Maintain height/tangent show up for two-rail sweeping
Sweep maintain height checkbox=Behoud hoogte
Sweep maintain tangent checkbox=Tangent behouden
Sweep pick scaling rail button=Sel. schaling rail

; Text command
Text pick base point prompt=Sel. basis punt
Text options prompt=Tekst opties
Text font label=Font:
*Text font style label=Style:
Text bold checkbox=Vet
Text italic checkbox=Cursief
Text height label=Hoogte:
Text thickness label=Dikte:
Text create label=Opmaak:
Text create solids=Solide
Text create surfaces=Vlak
Text create curves=Lijnen

; Trim command
Trim select objects prompt=Sel. objecten voor trim
Trim select cutters prompt=Sel. te snijden objecten of Gereed voor huidig selectie
; Adding trim points is available when trimming curves.
Trim select trim points prompt=Selecteer trim punten
Trim select remove prompt=Sel. te verwijderen stukken of klik Gereed om alles te behouden
Trim select keep prompt=Sel. te behouden stukken of klik Gereed om alles te behouden
*Trim isocurve button=Isocurve
Trim extend lines checkbox=Verleng lijnen
Trim project intersections checkbox=Projecteer kruisingen
Trim add trim points button=Trim punten toevoegen
Trim mode label=Modus:
Trim mode remove=Verwijderen
Trim mode keep=Behouden
*Trim delete cutting objects checkbox=Delete cutting objects
*Trim keep all joined checkbox=Keep all joined

; Twist command
*Twist select prompt=Select objects to twist
*Twist axis start prompt=Pick start of twist axis
*Twist axis end prompt=Pick end of twist axis
*Twist angle prompt=Choose twist angle
*Twist limit to axis checkbox=Limit to axis
*Twist ease in slider label=Ease in
*Twist ease out slider label=Ease out

; View labels in the upper-left corner of a viewport.
TopViewLabel=Bovenkant
BottomViewLabel=Onderkant
LeftViewLabel=Links
RightViewLabel=Rechts
FrontViewLabel=Voorkant
BackViewLabel=Achter
3DViewLabel=3D
; The following labels are used when the view is aligned to a custom cplane grid.
*TopViewLabel CPlane=Top (cplane)
*BottomViewLabel CPlane=Bottom (cplane)
*LeftViewLabel CPlane=Left (cplane)
*RightViewLabel CPlane=Right (cplane)
*FrontViewLabel CPlane=Front (cplane)
*BackViewLabel CPlane=Back (cplane)

; License key dialog
*License dialog title=License key
*License dialog welcome message=Welcome to MoI!
; Note the %1% in the following entries gets replaced with the appropriate version number.
*License dialog beta notice=This beta release requires a v%1% license key.
*License dialog upgrade license title=Upgrade license
*License dialog upgrade notice=This upgrade license also requires a license from the previous version.
*License dialog key label=Please enter your v%1% license key:
*License dialog NFR message title=Not for Resale license
*License dialog NFR message=This license is for a Not For Resale (NFR) version. It is intended to be used for evaluation, testing, and support purposes only and should not be re-sold or otherwise transferred for value.

; License in use message - this shows up if one license is running at the same time on 2
; different machines on a network. %1% will be the in-use user's name, %2% the machine name.
; \n will put in a line break (newline).
*License in use message=This license is already in use by %1% on %2%.\n\nOne license may be installed on different machines (for example\non both your desktop and your laptop), but only one machine\nshould be running an individual license at any particular time.\n\nIf you need to run on multiple machines simultaneously, please\npurchase an additional license for each machine.\n\nThis instance will close.
*License in use message title=License in use

; Trial # of days left dialog, shown at startup for trial version.
*Trial days left dialog title=MoI trial
*Trial days left header=MoI trial version
*Trial days left=%1% days remaining
*Trial order info=<nobr>Web site: <a href="http://moi3d.com">http://moi3d.com</a></nobr>

; Trial expired dialog.
*Trial expired dialog title=MoI trial expired
*Trial expired message=<p><nobr>This trial version of MoI has expired.</nobr></p><p>Please visit <a href="http://moi3d.com">http://moi3d.com</a> if you would like to purchase this software.</p>


; Save disabled dialog
; This is for the alternate trial version that has saving disabled instead of a
; time limit.
*Save disabled dialog title=Save disabled
*Save disabled dialog message=Sorry, saving is disabled in this trial version

; Text edit context menu - this is a small menu shown when right-clicking on a text input field.
*Text edit context menu Cut=Cut
*Text edit context menu Copy=Copy
*Text edit context menu Paste=Paste
*Text edit context menu Delete=Delete
*Text edit context menu Select All=Select All

; License agreement dialog, used on OSX version displayed on first run.
*OSX license agreement dialog title=License Agreement
*OSX license agreement dialog Accept button=Accept
*OSX license agreement dialog Decline button=Decline
